Product detailed description
Mitochondriak® Maxi - high-intensity red and near-infrared therapy at home
Mitochondriak® Maxi is a powerful, compact red light therapy panel for users who want a serious home setup without moving into a full-body professional system. It combines 300 LEDs, 7 wavelengths, a touchscreen, preset programs, independent RED/NIR control and a practical 90 × 30 cm format.
Maxi is suitable for home therapy, sports recovery, wellness routines and advanced biohacking. In one session it illuminates approximately half the body. For full-body use, simply do front and back sessions or pair two Maxi panels into an ULTRA setup using wireless synchronization.
✅ Half-body coverage in a compact 90 × 30 cm panel.
✅ 7 wavelengths from 630 to 940 nm.
✅ Touchscreen, programs and custom settings for easier daily use.
✅ Zero flicker and no measurable EMF at the recommended distance.
Key features
Why choose Mitochondriak® Maxi?
The core features that make Maxi a strong choice for home red light therapy, recovery and biohacking.
7
7 wavelengths
630, 670, 760, 810, 830, 850 and 940 nm in one red and NIR panel.
300
300 LEDs
A compact 90 × 30 cm panel that illuminates approximately half the body.
Hz
Adjust RED and NIR pulsation separately from 0 to 10,000 Hz.
✓
Zero flicker
Zero flicker and no measurable EMF at the recommended distance.
Comparison
Mitochondriak® Maxi vs typical red light panels
A practical comparison of the features most people check before buying a red light therapy panel.
| Feature |
Mitochondriak® Maxi |
Typical panels |
| Wavelength spectrum |
7 wavelengths
630 to 940 nm |
Varies by model
often narrower spectrum |
| 760 and 940 nm included |
Yes
additional NIR options |
Not always
depends on the device |
| RED/NIR control |
Separate
intensity and pulsation |
Not always separate |
| Touchscreen programs |
Preset + custom
goal-based use |
Often basic controls |
| Flicker and EMF |
Zero flicker
no EMF at distance |
Check each seller |
| Home upgrade path |
ULTRA setup
pair 2 Maxi panels |
Model dependent |
This is a general comparison. Features of typical panels vary by model and seller.
Technical specifications
Product parameters at a glance
The most important verified parameters of the Mitochondriak® Maxi panel.
Dimensions
90 × 30 × 7 cm
Show all parameters
| Wavelengths |
630, 670, 760, 810, 830, 850, 940 nm |
| Intensity, solarmeter |
>110 mW/cm² at 30 cm |
| Intensity, spectrometer |
>60 mW/cm² at 30 cm |
| Intensity control |
0 to 100%, separately for RED and NIR |
| Pulsation |
0 to 10,000 Hz, separately for RED and NIR |
| Body coverage |
Approximately half body per session |
| Touchscreen |
Yes |
| Wireless sync |
Yes, for pairing 2 Maxi panels into ULTRA |
| Flicker |
Zero flicker |
| EMF |
No measurable EMF at the recommended distance |
7 wavelengths from 630 to 940 nm
Maxi combines red and near-infrared light in one panel, giving you a broader wavelength profile than many basic two-wavelength devices.
RED light: 630 and 670 nm
Red light is mainly used for more superficial areas such as skin, face, surface tissue and general daily photobiomodulation routines.
- Useful for skin appearance and collagen-oriented routines.
- Suitable for shorter local sessions.
- Can be used alone or together with NIR.
NIR light: 760, 810, 830, 850 and 940 nm
Near-infrared wavelengths are typically used for deeper tissue exposure and whole-body recovery routines.
- Broader NIR coverage than basic 810/850 nm panels.
- Includes 760 and 940 nm for additional spectrum diversity.
- Can be controlled independently from RED.
How to use Mitochondriak® Maxi
Start from 30 to 60 cm distance and use the panel for 10 to 20 minutes per session. If you are new to red light therapy, begin with shorter sessions, lower intensity and more distance, then adjust gradually according to your comfort.
- Surface areas: 5 to 10 minutes may be enough.
- General half-body sessions: 10 to 20 minutes is a practical starting range.
- Deeper targets or lower intensity: 10 to 30 minutes can be used according to tolerance.
- Full-body use: do front and back sessions, or pair two Maxi panels into ULTRA.
The panel is not intended to diagnose, treat or cure disease. For more context, read the character of Mitochondriak® products.
Preset programs for easier use
Choose a goal-based program on the touchscreen, such as muscles, recovery, sleep or skin. The panel automatically sets intensity, pulsation and timer, so you can start quickly without adjusting every parameter manually.
Touchscreen, custom programs and wireless synchronization
Maxi is built for simple daily use, but also gives advanced users detailed control over RED and NIR settings.
RED, NIR or both
Activate red light, near-infrared light or both at the same time. Set each mode according to your session.
Preset programs
Select a program based on your goal and start the session with one tap.
Intensity and pulsation
Adjust intensity from 0 to 100% and pulsation from 0 to 10,000 Hz separately for RED and NIR.
Timer by touch
Set the session time directly on the display. The device turns off automatically when time is up.
Wireless synchronization
Pair two Maxi panels and use them as one large ULTRA system for full-body therapy.
Choose a goal-based program
New to red light therapy? Select a preset program and let the device choose the main settings for you.
Create your own program
Set intensity, pulsation and time according to your preference, save the setup and repeat it anytime.
Multiple users, different goals
Saved programs are practical when more people use the same panel or when you use different routines during the week.
What is in the box?
The package contains everything needed for basic use and hanging installation.
- Mitochondriak® Maxi red light therapy panel
- Power cable
- Safety glasses
- Remote control
- User manual
- Hanging system
Tip: Maxi and the floor stand work perfectly together
Place the panel into the floor stand and move it around easily on wheels. This is practical for front/back sessions, seated use and shared use at home.
Safety
Certification and product safety
Certification documents and product safety information are available on a dedicated page.
View certification
30 days
30-day satisfaction guarantee
Try Mitochondriak® products for 30 days. If the product does not meet your expectations, return it undamaged in the original packaging with all accessories.
How returns work
Frequently asked questions about Mitochondriak® Maxi
Practical answers before purchase and first use.
What is the recommended distance and session length?
Start from 30 to 60 cm distance for 10 to 20 minutes per session. For surface areas, 5 to 10 minutes may be enough; for deeper targets, use 10 to 30 minutes. Begin conservatively and adjust intensity, distance and time according to your comfort.
Does the Maxi cover the whole body?
One Maxi panel illuminates approximately half the body in one session. For full-body use, do front and back sessions or pair two Maxi panels using wireless synchronization to create an ULTRA setup.
Which wavelengths are included?
Maxi combines 630, 670, 760, 810, 830, 850 and 940 nm. This covers red and near-infrared light in one panel.
Can I adjust intensity and pulsation separately?
Yes. The touchscreen lets you adjust RED and NIR intensity from 0 to 100% and pulsation from 0 to 10,000 Hz separately. You can also use preset programs or save your own settings.
Is Maxi flicker-free and low EMF?
According to the product parameters, Maxi is zero flicker and has no measurable EMF at the recommended distance.
What is in the box?
The package contains the Mitochondriak® Maxi panel, power cable, safety glasses, remote control, user manual and hanging system.
Do I need a stand?
No. A hanging system is included. For easier positioning and mobility, you can add the Mitochondriak® Maxi floor stand separately.
Additional parameters
|
|
Red light therapy devices |
|
|
2 years
|
|
|
11 kg
|
|
|
0726529982558
|
|
|
Mitochondriak Maxi |
|
|
910x298x65 mm |
|
|
106*36*15 cm |
|
|
11 Kg |
|
|
>120 mW/cm2 from a distance of 15 cm |
|
|
approx. 55 to 60 mW/cm2 from 30 cm distance |
|
|
900 watt |
|
|
482 watt |
|
|
300 pcs |
|
|
30 degrees |
|
|
4 pcs |
|
|
630, 670, 760, 810, 830, 850, 940 nm |
|
|
Yes |
|
|
Yes (set by minutes) |
|
|
AC 110-240 V |
|
|
50/60 Hz |
|
|
at the recommended distance from the device zero (0.00 uT/mG, 0.00 V/m) |
|
|
Reduced (1 to 2 Hz - measured with UPRtek spectrometer) |
|
|
0.9 to 5% (measured by UPRtek spectrometer) |
|
|
0 to 0.1 (measured by UPRtek spectrometer) |
|
|
Metal/Plastic |
|
|
Yes, built-in in the back |
|
|
50,000 hours (137 years at 60 min./day lighting) |
|
|
2 Years |
|
|
CE, FCC, ROHS |
5 Steps to Build a Solar Callus and Avoid Getting Burned by UV Light:
Hormone melatonin is made by mitochondria by light:
Product rating
5,0
The average product rating is 5,0 out of 5 stars.
1 rating
List of ratings
5
Great device and practical. For every Mitochondriac!
.png){kind=logo}
.jpg)
.jpg)
.jpg)
